Front tablet

Top > Setup of the Tablet > Front tablet

Mountable Tablet Sizes

The maximum size of tablet that can be mounted to the printer is as shown below.

304 x 216 mm {12.0 x 8.5"} (height x width), 9mm {0.35"} (depth)

Make sure that your tablet does not stick out from the tablet table.

Use one of the tablet tables appropriate for the size of your tablet.

Tablet table size	Tablet size mountable to the tablet table
Tablet table size	Width	Height
Standard	Approx. 176 mm {6.9"} or less	Approx. 282 mm {11.1"} or less
Large	Approx. 216 mm {8.5"} or less	Approx. 304 mm {12.0"} or less

For instructions on how to replace the tablet table, see the page below.

Replacing the Tablet Table

Mountable Tablet Types

The tablets that can be connected to the printer and the available USB connectors are as shown below. To know the location of the USB connectors, see Connectors.

““ means that the device can be connected.
““ means that availability varies by device to device.
"--" means that it is not supported.

Type	Product name	USB connector				Tablet table
		USB-A - Device Charging (up to 2.1 A)		Type-A (up to 0.5 A)	Type-B
		Data communication	Charging	Charging	Data communication
Apple device^16	iPad (5th generation) iPad (6th generation) iPad (7th generation)		^*2	--	--	Standard
	iPad Air 2
	iPad Pro (3rd generation) iPad Pro (4th generation)	--	--	--	--	Large
	iPad mini 4		^*2	^*3	--	Standard
Windows tablet^*6		--	--	--		Standard/Large
Android device^*6		^*4	^*2	--	^*5	Standard/Large

*1	A device equipped with a Lightning connector can be used. Use a genuine Apple or MFi Certified Lightning to USB Cable. If you use a non-certified (non MFi) Lightning to USB Cable, or use an extension cable, data communication and charging may not be performed normally.
*2	When a tablet computer is connected to the USB-A - Device Charging connector, the Bluetooth function of the printer is disabled. To charge the device keeping it connected via Bluetooth, change the Interface selection setting to "Bluetooth only". For more details, see the Technical Reference Guide. However, if you do so, the maximum supply current is limited to 0.5 A, which may not be enough for charging some types of tablet. Please use the tablet after testing and evaluating it adequately.
*3	Depending on the settings or usage conditions of the device, it may not be fully charged. To fully charge the device, darken its screen or take such other measures to reduce power consumption.
*4	When connecting an Android device for data communication, make sure that the device satisfies the following requirements. Requirements: The version of Android OS is 10 or later with kernel version 4.9.15 or later However, Epson does not guarantee normal operation of all Android devices even if they satisfy the requirements. Run some tests before actually using the device.
*5	The device must be compatible with an OTG cable and must be capable of acting as a USB host.
*6	For more detailed information about tablets that can be used with the printer, see the link below. www.epson-biz.com/?content=sht_tmm30ii-sl_tablet

Note:

If your tablet is not allowed to connect to the connector of the printer, pull out its cable from the printer just like the AC cable.

Troubleshooting

Before Using the Printer

Part Names

Setup of the Tablet

Setup of the Printer

Basic Operations

Cleaning

Troubleshooting

Using the Optional Products

Appendix

Top > Setup of the Tablet > Front tablet

Front tablet

Mountable Tablet Sizes

The maximum size of tablet that can be mounted to the printer is as shown below.

304 x 216 mm {12.0 x 8.5"} (height x width), 9mm {0.35"} (depth)

Make sure that your tablet does not stick out from the tablet table.

Use one of the tablet tables appropriate for the size of your tablet.

Tablet table size	Tablet size mountable to the tablet table
Tablet table size	Width	Height
Standard	Approx. 176 mm {6.9"} or less	Approx. 282 mm {11.1"} or less
Large	Approx. 216 mm {8.5"} or less	Approx. 304 mm {12.0"} or less

For instructions on how to replace the tablet table, see the page below.

Replacing the Tablet Table

Mountable Tablet Types

The tablets that can be connected to the printer and the available USB connectors are as shown below. To know the location of the USB connectors, see Connectors.

““ means that the device can be connected.
““ means that availability varies by device to device.
"--" means that it is not supported.

Type	Product name	USB connector				Tablet table
		USB-A - Device Charging (up to 2.1 A)		Type-A (up to 0.5 A)	Type-B
		Data communication	Charging	Charging	Data communication
Apple device^16	iPad (5th generation) iPad (6th generation) iPad (7th generation)		^*2	--	--	Standard
	iPad Air 2
	iPad Pro (3rd generation) iPad Pro (4th generation)	--	--	--	--	Large
	iPad mini 4		^*2	^*3	--	Standard
Windows tablet^*6		--	--	--		Standard/Large
Android device^*6		^*4	^*2	--	^*5	Standard/Large

*1	A device equipped with a Lightning connector can be used. Use a genuine Apple or MFi Certified Lightning to USB Cable. If you use a non-certified (non MFi) Lightning to USB Cable, or use an extension cable, data communication and charging may not be performed normally.
*2	When a tablet computer is connected to the USB-A - Device Charging connector, the Bluetooth function of the printer is disabled. To charge the device keeping it connected via Bluetooth, change the Interface selection setting to "Bluetooth only". For more details, see the Technical Reference Guide. However, if you do so, the maximum supply current is limited to 0.5 A, which may not be enough for charging some types of tablet. Please use the tablet after testing and evaluating it adequately.
*3	Depending on the settings or usage conditions of the device, it may not be fully charged. To fully charge the device, darken its screen or take such other measures to reduce power consumption.
*4	When connecting an Android device for data communication, make sure that the device satisfies the following requirements. Requirements: The version of Android OS is 10 or later with kernel version 4.9.15 or later However, Epson does not guarantee normal operation of all Android devices even if they satisfy the requirements. Run some tests before actually using the device.
*5	The device must be compatible with an OTG cable and must be capable of acting as a USB host.
*6	For more detailed information about tablets that can be used with the printer, see the link below. www.epson-biz.com/?content=sht_tmm30ii-sl_tablet

Note:

If your tablet is not allowed to connect to the connector of the printer, pull out its cable from the printer just like the AC cable.

Front tablet

Mountable Tablet Sizes

Mountable Tablet Types

Front tablet

Mountable Tablet Sizes

Mountable Tablet Types

Language selection