Communication Protocol (for Europe) Document

Revision Rev 7.00
Uploaded date 2022/11/07
File size 7,188KB
Explanation [Target model]
FP-81 II RT
FP-90 III RT
RT Server

[Changes from previous version 6.00]

1. Corrected Serial Number Prefixes 99IEB and 99IEC.

2. Updated 1-047 command as reprinting is supported in Demo and Simulation modes.

3. Corrected 4-014/67 inverted descriptions.

4. Updated 4-014 and 4-015 default values.

5. Added references to "Buono Celiachia".

6. Updated 3-103 and 3-104 commands to include DOC TYPE 6 (electronic payments filter).

7. Updated 3-104 command to include multiple frame mode.

8. Added totalisers 86 and 87 to 2-050/2-051 command.

9. Added E-Receipt references.

10. Added 4-015/28, 4-015/29, 4-215/28 and 4-215/29 E-Receipt parameters.

11. Added 1-131, 1-132, 1-133, 1-332, 1-333 and 9-226 E-Receipt commands.

12. Updated 9-016 command to include E-Receipt files.

13. Expanded 1-084, 4-031, 9-022 and 9-222 commands.

14. Expanded common errors table.

15. Added 273 (EMISSION MODE) and 274 (CLIENT ID) key functions.

16. Added CORS Origin setting to commands 4-034 and 4-234. Default = * (asterisk).

17. Expanded APPENDIX B and E.

18. Updated and expanded "4.1. Operating Modes" and "4.2 Demo and Simulation Modes" chapters.

19. Created separate TX and RX tables throughout.

20. Added 1-108 command.

21. Maximum number of fiscal daily closures figure corrected from 3653 to 3650.

22. Document updated throughout.


[About this manual]
Provides the following information:

1. Introduction

2. Modes, States and Transitions

3. Document Types

4. Physical Level

5. Data Link Level (ACK and PDU)

6. Application Level

7. Errors

8. Data Communication Exchanges

9. Document Layouts

10. Special Documents

11. H1, H2, H3, H4 and H9 Commands and Responses with Fields

12. Firmware Cross-Reference Tables

13. Keyboard Configuration

14. Character Sets and Limits

15. Commands to Read and Print from MPD (EJ)

16. PLU

17. Error 02 Low Paper Behaviour

18. Historical VAT

19. Rounding

Notes on downloading

IMPORTANT!
BEFORE DOWNLOADING SOFTWARE, DOCUMENT OR OTHER CONTENTS ON THIS WEBSITE (the “Software”), YOU NEED TO REVIEW AND AGREE TO THE TERMS AND CONDITIONS SET FORTH BELOW, AND YOU MUST FOLLOW THE TERMS AND CONDITIONS WHEN YOU USE THE SOFTWARE.

  • Please review and agree to the license agreement, README or other documents that the Software contains carefully before Installing or using the Software.
  • You agree to use the Software only with the corresponding Epson brand products.
  • You acknowledge and agree that the use of the Software is at your sole risk. THE SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND. EPSON AND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE.
  • You agree not to modify, adapt or translate the Software and further agree not to attempt to reverse engineer, decompile, disassemble or otherwise attempt to discover the source code of the Software.
  • You agree that the Software will not be shipped, transferred or exported into any country or used in any manner prohibited by the applicable export laws, restrictions or regulations.
  • Download

    Communication Protocol    Rev 7.00

    File Name:
    Communication Protocol Version 7.00.zip
    File size:
    7,188KB

    Jump to the top